Tools & Hardware

1/2" Insert Ratchet Head 45 Teeth 14 x 18mm

CODE: 1292CQ200R

45 teeth ratchet Designed for use with the P-SERIES insert torque wrenches Use with 3/8", 1/2", & 3/4" drive sockets & accessories Satin finish

Dimensions (W x H x D)80x100x42

$23.70

In stock

+ −

Minimum quantity for "1/2" Insert Ratchet Head 45 Teeth 14 x 18mm" is 1.

1/2" Torque Multiplier Set FOAMX4 2 Pieces

CODE: TEXMP12

Includes a 1/2" drive torque wrench giving a range of 40 to 210Nm The torque multiplier can then be used to multiply the torque at a ratio of 1:3 increasing the potential torque to 630Nm For use with 3/4" drive sockets Tools are held in place using three colour pre-cut high-density EVA...

Dimensions (W x H x D)610x135x95

$396.00

In stock

+ −

Minimum quantity for "1/2" Torque Multiplier Set FOAMX4 2 Pieces" is 1.

1/2" Torque Multiplier Set TTX4 2 Pieces

CODE: TTXMP12

A 1292AG-EP 1/2'' drive tested and certified 200Nm torque wrench together with an MP1400 torque multiplier that converts the torque at a ratio of 3:1 up to a maximum torque capacity of 1,500Nm with a 3/4" male square drive. Supplied in the unique Teng Tools TTX tray for use on it's own or as...

Dimensions (W x H x D)120x580x73

$374.00

In stock

+ −

Minimum quantity for "1/2" Torque Multiplier Set TTX4 2 Pieces" is 1.

1/2" Torque Stick 110Nm

CODE: 923110

1/2'' drive torque sticks for tightening wheel nuts using percussive nut runners. When the intended tightening torque is reached the socket end stops while the drive end springs back between each stroke. Reduces the risk of sheared wheel bolts or deformed rims. Suitable for retaining rings and...

Dimensions (W x H x D)45x250x25

$13.40

In stock

+ −

Minimum quantity for "1/2" Torque Stick 110Nm" is 10.

1/2" Torque Stick 120Nm

CODE: 923120

1/2'' drive torque sticks for tightening wheel nuts using percussive nut runners. When the intended tightening torque is reached the socket end stops while the drive end springs back between each stroke. Reduces the risk of sheared wheel bolts or deformed rims. Suitable for retaining rings and...

Dimensions (W x H x D)45x250x25

$13.40

In stock

+ −

Minimum quantity for "1/2" Torque Stick 120Nm" is 10.

1/2" Torque Stick 140Nm

CODE: 923140

1/2'' drive torque sticks for tightening wheel nuts using percussive nut runners. When the intended tightening torque is reached the socket end stops while the drive end springs back between each stroke. Reduces the risk of sheared wheel bolts or deformed rims. Suitable for retaining rings and...

Dimensions (W x H x D)45x250x25

$13.40

In stock

+ −

Minimum quantity for "1/2" Torque Stick 140Nm" is 10.

1/2" Torque Stick 90Nm

CODE: 923090

1/2'' drive torque sticks for tightening wheel nuts using percussive nut runners. When the intended tightening torque is reached the socket end stops while the drive end springs back between each stroke. Reduces the risk of sheared wheel bolts or deformed rims. Suitable for retaining rings and...

Dimensions (W x H x D)45x250x25

$13.40

In stock

+ −

Minimum quantity for "1/2" Torque Stick 90Nm" is 10.

1/2" Torque Sticks & Wheel Nut Set TT1 8 Pieces

CODE: TTTS08

8 piece torque stick and wheel nut set, for tightening wheel nuts on cars. When the intended tightening torque is reached, the socket end stops while the drive end springs back between each stroke. Reduces the risk of sheared wheel bolts or deformed rims. Supplied in the unique Teng Tools TC...

Dimensions (W x H x D)143x270x50

$89.50

In stock

+ −

Minimum quantity for "1/2" Torque Sticks & Wheel Nut Set TT1 8 Pieces" is 10.

1/2" Torque Wrench 40 - 210Nm

CODE: 1292AG-EP

NOTE: For a limited time we will be packing some of our torque wrenches in black foam instead of our red plastic moulded boxes. Torque wrench according to DIN3122. With ratchet the torque wrench can be used for both tightening and final checking of the torque. Reversible with lever, but only...

Dimensions (W x H x D)90x560x70

$61.50

In stock

+ −

Minimum quantity for "1/2" Torque Wrench 40 - 210Nm" is 10.

1/2" Torque Wrench 40-210 Nm TTX4

CODE: TTX1292

1/2" drive torque wrench with built in angular gauge (40-210Nm/30-150ft/lb) in a TTX tool tray. Supplied with a calibration certificate in the unique Teng Tools TC tray for use on it's own or as part of the Teng Tools TC control system. (560x110x40mm, 1.6 kilos) Torque wrench 1/2"...

Dimensions (W x H x D)120x580x53

$60.00

In stock

+ −

Minimum quantity for "1/2" Torque Wrench 40-210 Nm TTX4" is 10.

1/2" Torque Wrench 70 - 350Nm

CODE: 1292AG-E4

Torque wrench according to DIN3122. With ratchet the torque wrench can be used for both tightening and final checking of the torque. Reversible with lever, but only for right hand action for torque checking. Equipped with angular gauge for after tightening. Graduated in Nm and ft/lbs. Lockable...

Dimensions (W x H x D)90x670x70

$99.50

In stock

+ −

Minimum quantity for "1/2" Torque Wrench 70 - 350Nm" is 6.

1/2" Torque Wrench Bi-Directional 40 - 210Nm

CODE: 1292AG-ER

The Torque Wrench 1/2'' 40-210Nm features a bi-directional click type torque wrench with a 24 teeth ratchet and twist lock mechanism, allowing users to maintain a set torque up to 210Nm for both left and right handed threads. A built-in angular gauge allows for accurate torque over-tightening,...

Dimensions (W x H x D)90x560x70

$68.00

In stock

+ −

Minimum quantity for "1/2" Torque Wrench Bi-Directional 40 - 210Nm" is 10.