Search options Open Hide
  

Choose category
  orReset
Sort by:
from A to Z
12
1/2" Stud Extractor Socket 6mm
ST12506-C
Reversible - suitable for left and right handed threads. Hexagon drive end and 1/2inch drive. Maximum recommended torque is 50Nm.
Dimensions (W x H x D)45x110x24
$9.80
In stock

Minimum quantity for "1/2" Stud Extractor Socket 6mm" is 10.

1/2" Stud Extractor Socket 8mm
ST12508-C
Reversible - suitable for left and right handed threads. Hexagon drive end and 1/2inch drive. Maximum recommended torque is 50Nm.
Dimensions (W x H x D)45x110x24
$9.80
In stock

Minimum quantity for "1/2" Stud Extractor Socket 8mm" is 10.

1/2" Torque Multiplier Set FOAMX4 2 Pieces
TEXMP12
Includes a 1/2" drive torque wrench giving a range of 40 to 210Nm The torque multiplier can then be used to multiply the torque at a ratio of 1:3 increasing the potential torque to 630Nm For use with 3/4" drive sockets Tools are held in place using three colour pre-cut high-density EVA...
Dimensions (W x H x D)610x135x95
$396.00
In stock

Minimum quantity for "1/2" Torque Multiplier Set FOAMX4 2 Pieces" is 1.

1/2" Torque Multiplier Set TTX4 2 Pieces
TTXMP12
A 1292AG-EP 1/2'' drive tested and certified 200Nm torque wrench together with an MP1400 torque multiplier that converts the torque at a ratio of 3:1 up to a maximum torque capacity of 1,500Nm with a 3/4" male square drive. Supplied in the unique Teng Tools TTX tray for use on it's own or as...
Dimensions (W x H x D)120x580x73
$374.00
In stock

Minimum quantity for "1/2" Torque Multiplier Set TTX4 2 Pieces" is 1.

1/2" Torque Stick 110Nm
923110
1/2'' drive torque sticks for tightening wheel nuts using percussive nut runners. When the intended tightening torque is reached the socket end stops while the drive end springs back between each stroke. Reduces the risk of sheared wheel bolts or deformed rims. Suitable for retaining rings and...
Dimensions (W x H x D)45x250x25
$13.40
In stock

Minimum quantity for "1/2" Torque Stick 110Nm" is 10.

1/2" Torque Stick 120Nm
923120
1/2'' drive torque sticks for tightening wheel nuts using percussive nut runners. When the intended tightening torque is reached the socket end stops while the drive end springs back between each stroke. Reduces the risk of sheared wheel bolts or deformed rims. Suitable for retaining rings and...
Dimensions (W x H x D)45x250x25
$13.40
In stock

Minimum quantity for "1/2" Torque Stick 120Nm" is 10.

1/2" Torque Stick 140Nm
923140
1/2'' drive torque sticks for tightening wheel nuts using percussive nut runners. When the intended tightening torque is reached the socket end stops while the drive end springs back between each stroke. Reduces the risk of sheared wheel bolts or deformed rims. Suitable for retaining rings and...
Dimensions (W x H x D)45x250x25
$13.40
In stock

Minimum quantity for "1/2" Torque Stick 140Nm" is 10.

1/2" Torque Stick 90Nm
923090
1/2'' drive torque sticks for tightening wheel nuts using percussive nut runners. When the intended tightening torque is reached the socket end stops while the drive end springs back between each stroke. Reduces the risk of sheared wheel bolts or deformed rims. Suitable for retaining rings and...
Dimensions (W x H x D)45x250x25
$13.40
In stock

Minimum quantity for "1/2" Torque Stick 90Nm" is 10.

1/2" Torque Sticks & Wheel Nut Set TT1 8 Pieces
TTTS08
8 piece torque stick and wheel nut set, for tightening wheel nuts on cars. When the intended tightening torque is reached, the socket end stops while the drive end springs back between each stroke. Reduces the risk of sheared wheel bolts or deformed rims. Supplied in the unique Teng Tools TC...
Dimensions (W x H x D)143x270x50
$89.50
In stock

Minimum quantity for "1/2" Torque Sticks & Wheel Nut Set TT1 8 Pieces" is 10.

1/2" Torque Wrench 40 - 210Nm
1292AG-EP
NOTE: For a limited time we will be packing some of our torque wrenches in black foam instead of our red plastic moulded boxes. Torque wrench according to DIN3122. With ratchet the torque wrench can be used for both tightening and final checking of the torque. Reversible with lever, but only...
Dimensions (W x H x D)90x560x70
$61.50
In stock

Minimum quantity for "1/2" Torque Wrench 40 - 210Nm" is 10.

1/2" Torque Wrench 40-210 Nm TTX4
TTX1292
1/2" drive torque wrench with built in angular gauge (40-210Nm/30-150ft/lb) in a TTX tool tray. Supplied with a calibration certificate in the unique Teng Tools TC tray for use on it's own or as part of the Teng Tools TC control system. (560x110x40mm, 1.6 kilos) Torque wrench 1/2"...
Dimensions (W x H x D)120x580x53
$60.00
In stock

Minimum quantity for "1/2" Torque Wrench 40-210 Nm TTX4" is 10.

1/2" Torque Wrench 70 - 350Nm
1292AG-E4
Torque wrench according to DIN3122. With ratchet the torque wrench can be used for both tightening and final checking of the torque. Reversible with lever, but only for right hand action for torque checking. Equipped with angular gauge for after tightening. Graduated in Nm and ft/lbs. Lockable...
Dimensions (W x H x D)90x670x70
$99.50
In stock

Minimum quantity for "1/2" Torque Wrench 70 - 350Nm" is 6.

    Cancel