1/2" Stubby Impact Socket DIN Metric 15mm

CODE: 920715-C

Short reach for use in confined spaces DIN standard design for use with a retaining pin and ring Chrome molybdenum for use with power tools Black phosphate finish for easy identification as an impact socket accessory Ring and pin fixing hole on the female end to secure the socket...

Dimensions (W x H x D)45x78x24

$4.00

Availability: In stock

Minimum quantity for "1/2" Stubby Impact Socket DIN Metric 15mm" is 10.

1/2" Stubby Impact Socket DIN Metric 16mm

CODE: 920716-C

Short reach for use in confined spaces DIN standard design for use with a retaining pin and ring Chrome molybdenum for use with power tools Black phosphate finish for easy identification as an impact socket accessory Ring and pin fixing hole on the female end to secure the socket...

Dimensions (W x H x D)45x78x24

$4.00

Availability: In stock

Minimum quantity for "1/2" Stubby Impact Socket DIN Metric 16mm" is 10.

1/2" Stubby Impact Socket DIN Metric 17mm

CODE: 920717-C

Short reach for use in confined spaces DIN standard design for use with a retaining pin and ring Chrome molybdenum for use with power tools Black phosphate finish for easy identification as an impact socket accessory Ring and pin fixing hole on the female end to secure the socket...

Dimensions (W x H x D)45x78x26

$4.46

Availability: In stock

Minimum quantity for "1/2" Stubby Impact Socket DIN Metric 17mm" is 10.

1/2" Stubby Impact Socket DIN Metric 18mm

CODE: 920718-C

Short reach for use in confined spaces DIN standard design for use with a retaining pin and ring Chrome molybdenum for use with power tools Black phosphate finish for easy identification as an impact socket accessory Ring and pin fixing hole on the female end to secure the socket...

Dimensions (W x H x D)45x78x28

$4.50

Availability: In stock

Minimum quantity for "1/2" Stubby Impact Socket DIN Metric 18mm" is 10.

1/2" Stubby Impact Socket DIN Metric 19mm

CODE: 920719-C

Short reach for use in confined spaces DIN standard design for use with a retaining pin and ring Chrome molybdenum for use with power tools Black phosphate finish for easy identification as an impact socket accessory Ring and pin fixing hole on the female end to secure the socket...

Dimensions (W x H x D)45x78x28

$4.50

Availability: In stock

Minimum quantity for "1/2" Stubby Impact Socket DIN Metric 19mm" is 10.

1/2" Stubby Impact Socket DIN Metric 21mm

CODE: 920721-C

Short reach for use in confined spaces DIN standard design for use with a retaining pin and ring Chrome molybdenum for use with power tools Black phosphate finish for easy identification as an impact socket accessory Ring and pin fixing hole on the female end to secure the socket...

Dimensions (W x H x D)45x78x30

$4.68

Availability: In stock

Minimum quantity for "1/2" Stubby Impact Socket DIN Metric 21mm" is 10.

1/2" Stubby Impact Socket DIN Metric 22mm

CODE: 920722-C

Short reach for use in confined spaces DIN standard design for use with a retaining pin and ring Chrome molybdenum for use with power tools Black phosphate finish for easy identification as an impact socket accessory Ring and pin fixing hole on the female end to secure the socket...

Dimensions (W x H x D)45x78x30

$5.00

Availability: In stock

Minimum quantity for "1/2" Stubby Impact Socket DIN Metric 22mm" is 10.

1/2" Stubby Impact Socket DIN Metric 24mm

CODE: 920724-C

Short reach for use in confined spaces DIN standard design for use with a retaining pin and ring Chrome molybdenum for use with power tools Black phosphate finish for easy identification as an impact socket accessory Ring and pin fixing hole on the female end to secure the socket...

Dimensions (W x H x D)45x78x30

$5.00

Availability: In stock

Minimum quantity for "1/2" Stubby Impact Socket DIN Metric 24mm" is 10.

1/2" Stud Extractor 19mm

CODE: ST12319

Designed for removing rounded or damaged bolt heads, nuts and studs Use together with a ratchet and accessories Chrome vanadium, satin finish

Dimensions (W x H x D)45x95x35

$26.40

Availability: In stock

Minimum quantity for "1/2" Stud Extractor 19mm" is 10.

1/2" Stud Extractor 21mm

CODE: ST12321

Designed for removing rounded or damaged bolt heads, nuts and studs Use together with a ratchet and accessories Chrome vanadium, satin finish

Dimensions (W x H x D)45x95x35

$27.70

Availability: In stock

Minimum quantity for "1/2" Stud Extractor 21mm" is 10.

1/2" Stud Extractor 22mm

CODE: ST12322

Designed for removing rounded or damaged bolt heads, nuts and studs Use together with a ratchet and accessories Chrome vanadium, satin finish

Dimensions (W x H x D)45x95x40

$29.30

Availability: In stock

Minimum quantity for "1/2" Stud Extractor 22mm" is 10.

1/2" Stud Extractor 24mm

CODE: ST12324

Designed for removing rounded or damaged bolt heads, nuts and studs Use together with a ratchet and accessories Chrome vanadium, satin finish

Dimensions (W x H x D)45x95x40

$29.50

Availability: In stock

Minimum quantity for "1/2" Stud Extractor 24mm" is 10.

1/2" Stud Extractor 25mm

CODE: ST12325

Designed for removing rounded or damaged bolt heads, nuts and studs Use together with a ratchet and accessories Chrome vanadium, satin finish

Dimensions (W x H x D)45x95x40

$30.50

Availability: In stock

Minimum quantity for "1/2" Stud Extractor 25mm" is 10.

1/2" Stud Extractor Eccentric

CODE: 2300

This 1/2" drive stud extractor is designed for inserting and extracting stud bolts, and the eccentric journalled, knurled wheel provides a firm grip on stud sizes from 5.5mm to 19mm.

Dimensions (W x H x D)50x65x50

$20.50

Availability: In stock

Minimum quantity for "1/2" Stud Extractor Eccentric" is 40.

1/2" Stud Extractor Socket 10mm

CODE: ST12510-C

Reversible - suitable for left and right handed threads. Hexagon drive end and 1/2inch drive. Maximum recommended torque is 90Nm.

Dimensions (W x H x D)45x120x28

$10.30

Availability: In stock

Minimum quantity for "1/2" Stud Extractor Socket 10mm" is 10.

1/2" Stud Extractor Socket 12mm

CODE: ST12512-C

Reversible - suitable for left and right handed threads. Hexagon drive end and 1/2inch drive. Maximum recommended torque is 90Nm.

Dimensions (W x H x D)45x120x28

$10.30

Availability: In stock

Minimum quantity for "1/2" Stud Extractor Socket 12mm" is 10.

1/2" Stud Extractor Socket 6mm

CODE: ST12506-C

Reversible - suitable for left and right handed threads. Hexagon drive end and 1/2inch drive. Maximum recommended torque is 50Nm.

Dimensions (W x H x D)45x110x24

$9.80

Availability: In stock

Minimum quantity for "1/2" Stud Extractor Socket 6mm" is 10.

1/2" Stud Extractor Socket 8mm

CODE: ST12508-C

Reversible - suitable for left and right handed threads. Hexagon drive end and 1/2inch drive. Maximum recommended torque is 50Nm.

Dimensions (W x H x D)45x110x24

$9.80

Availability: In stock

Minimum quantity for "1/2" Stud Extractor Socket 8mm" is 10.

1/2" Torque Multiplier Set FOAMX4 2 Pieces

CODE: TEXMP12

Includes a 1/2" drive torque wrench giving a range of 40 to 210Nm The torque multiplier can then be used to multiply the torque at a ratio of 1:3 increasing the potential torque to 630Nm For use with 3/4" drive sockets Tools are held in place using three colour pre-cut high-density EVA...

Dimensions (W x H x D)610x135x95

$396.00

Availability: In stock

Minimum quantity for "1/2" Torque Multiplier Set FOAMX4 2 Pieces" is 1.

1/2" Torque Multiplier Set TTX4 2 Pieces

CODE: TTXMP12

A 1292AG-EP 1/2'' drive tested and certified 200Nm torque wrench together with an MP1400 torque multiplier that converts the torque at a ratio of 3:1 up to a maximum torque capacity of 1,500Nm with a 3/4" male square drive. Supplied in the unique Teng Tools TTX tray for use on it's own or as...

Dimensions (W x H x D)120x580x73

$374.00

Availability: In stock

Minimum quantity for "1/2" Torque Multiplier Set TTX4 2 Pieces" is 1.

1/2" Torque Stick 110Nm

CODE: 923110

1/2'' drive torque sticks for tightening wheel nuts using percussive nut runners. When the intended tightening torque is reached the socket end stops while the drive end springs back between each stroke. Reduces the risk of sheared wheel bolts or deformed rims. Suitable for retaining rings and...

Dimensions (W x H x D)45x250x25

$13.40

Availability: In stock

Minimum quantity for "1/2" Torque Stick 110Nm" is 10.

1/2" Torque Stick 120Nm

CODE: 923120

1/2'' drive torque sticks for tightening wheel nuts using percussive nut runners. When the intended tightening torque is reached the socket end stops while the drive end springs back between each stroke. Reduces the risk of sheared wheel bolts or deformed rims. Suitable for retaining rings and...

Dimensions (W x H x D)45x250x25

$13.40

Availability: In stock

Minimum quantity for "1/2" Torque Stick 120Nm" is 10.

1/2" Torque Stick 140Nm

CODE: 923140

1/2'' drive torque sticks for tightening wheel nuts using percussive nut runners. When the intended tightening torque is reached the socket end stops while the drive end springs back between each stroke. Reduces the risk of sheared wheel bolts or deformed rims. Suitable for retaining rings and...

Dimensions (W x H x D)45x250x25

$13.40

Availability: In stock

Minimum quantity for "1/2" Torque Stick 140Nm" is 10.

1/2" Torque Stick 90Nm

CODE: 923090

1/2'' drive torque sticks for tightening wheel nuts using percussive nut runners. When the intended tightening torque is reached the socket end stops while the drive end springs back between each stroke. Reduces the risk of sheared wheel bolts or deformed rims. Suitable for retaining rings and...

Dimensions (W x H x D)45x250x25

$13.40

Availability: In stock

Minimum quantity for "1/2" Torque Stick 90Nm" is 10.

1/2" Torque Sticks & Wheel Nut Set TT1 8 Pieces

CODE: TTTS08

8 piece torque stick and wheel nut set, for tightening wheel nuts on cars. When the intended tightening torque is reached, the socket end stops while the drive end springs back between each stroke. Reduces the risk of sheared wheel bolts or deformed rims. Supplied in the unique Teng Tools TC...

Dimensions (W x H x D)143x270x50

$89.50

Availability: In stock

Minimum quantity for "1/2" Torque Sticks & Wheel Nut Set TT1 8 Pieces" is 10.

1/2" Torque Wrench 40 - 210Nm

CODE: 1292AG-EP

NOTE: For a limited time we will be packing some of our torque wrenches in black foam instead of our red plastic moulded boxes. Torque wrench according to DIN3122. With ratchet the torque wrench can be used for both tightening and final checking of the torque. Reversible with lever, but only...

Dimensions (W x H x D)90x560x70

$61.50

Availability: In stock

Minimum quantity for "1/2" Torque Wrench 40 - 210Nm" is 10.

1/2" Torque Wrench 40-210 Nm TTX4

CODE: TTX1292

1/2" drive torque wrench with built in angular gauge (40-210Nm/30-150ft/lb) in a TTX tool tray. Supplied with a calibration certificate in the unique Teng Tools TC tray for use on it's own or as part of the Teng Tools TC control system. (560x110x40mm, 1.6 kilos) Torque wrench 1/2"...

Dimensions (W x H x D)120x580x53

$60.00

Availability: In stock

Minimum quantity for "1/2" Torque Wrench 40-210 Nm TTX4" is 10.

1/2" Torque Wrench 70 - 350Nm

CODE: 1292AG-E4

Torque wrench according to DIN3122. With ratchet the torque wrench can be used for both tightening and final checking of the torque. Reversible with lever, but only for right hand action for torque checking. Equipped with angular gauge for after tightening. Graduated in Nm and ft/lbs. Lockable...

Dimensions (W x H x D)90x670x70

$99.50

Availability: In stock

Minimum quantity for "1/2" Torque Wrench 70 - 350Nm" is 6.

1/2" Torque Wrench Bi-Directional 40 - 210Nm

CODE: 1292AG-ER

The Torque Wrench 1/2'' 40-210Nm features a bi-directional click type torque wrench with a 24 teeth ratchet and twist lock mechanism, allowing users to maintain a set torque up to 210Nm for both left and right handed threads. A built-in angular gauge allows for accurate torque over-tightening,...

Dimensions (W x H x D)90x560x70

$68.00

Availability: In stock

Minimum quantity for "1/2" Torque Wrench Bi-Directional 40 - 210Nm" is 10.

1/2" Torque Wrench Bi-Directional 70 - 350Nm

CODE: 1292AG-E4R

Dimensions (W x H x D)90x670x70

$107.00

Availability: In stock

Minimum quantity for "1/2" Torque Wrench Bi-Directional 70 - 350Nm" is 6.

1/2" Torque Wrench P-Series 40-200 Nm TTX4

CODE: TTXP1292

Click type mechanism to signal when the required torque is reached Simple to adjust and easy to read Nm scale Locking button to ensure the set torque is securely maintained Compact head for easier use in confined spaces Quick release 72 teeth ratchet mechanism with twist reverse (DIN3122)...

Dimensions (W x H x D)120x580x53

$106.00

Availability: In stock

Minimum quantity for "1/2" Torque Wrench P-Series 40-200 Nm TTX4" is 10.

1/2" Torque Wrench Plus 20 - 100Nm

CODE: 1292P100

The P-series 1/2inch drive torque wrench is perfect when you need better functionality in those hard to reach areas, a smaller head and more ratchet teeth mean you can work easier in tight spots. Featuring a click type mechanism to signal when the required torque is reached. Simple to adjust...

Dimensions (W x H x D)90x560x70

$119.00

Availability: In stock

Minimum quantity for "1/2" Torque Wrench Plus 20 - 100Nm" is 10.